Visa / Mastercard/ Paypal / Mail Orders

The Desmo Times '98 ST2 Voltage Regulator Plate - $58

Back by popular demand this plate mounts beneath the bottom triple tree and allow owners of '98 ST2 models to avoid the infamous fried regulator syndrome. By placing the voltage regulator in the path of the airstream, electrical problems are minimized. Simple installation. Requires rerouting voltage regulator wires, but does NOT require any wire splicing. Simple 5 minute installation once the top fairing is removed.

Installation Instructions:

1. Remove old regulator plate from the headlight nacelle. Detach the lead wires
2. Remove the metal plate beneath the lower triple tree, noting the orientation of the curve.
3. Mount the regulator plate in the place of the removed curved plate with the flat edge facing forward.
4. Attach the regulator to the plate with the wires facing forward.
5. Route the wires of the regulator to the new location. On the wire attached to the left of the headlight, remove the bracket mount and reroute that wire to reach the regulator.

Note 1: Actual plate is anodized silver, not black, to match the color of the bottom triple tree.

Note 2: This plate is ONLY designed for the '98 ST2. Subsequent years had an upgraded voltage regulator and were relocated in the airflow beneath the headlight