EBC Front Wave Rotors - $475/set of two

Visa / Mastercard/ Paypal / Mail Orders

EBC Wave Rotors - $475/set of 2

These are the most cost effective wave rotors you can upgrade to. I tested a set on my 1000ss to see if they were as good as other aftermarket rotors I sell - Galfer and Braketech. Weight-wise they are competitive with the Braketechs and they are lighter than the Galfers. In terms of performance, I couldn't tell a difference between these rotors and the Braketechs costing $200 more per set.

These rotors fit the following Models: 400SS, M400, M600, M620 (single-disc and dual-disc), M696, 600SS, 748, 750 Sport, 750SS, M750, M800, 851, 888, 900ss, Mh900e, 900cr, 907ie, ST2, ST3, ST4, ST4S, 916, 996, 998, S4, M1000, S2R1000, S2R800. I ONLY have rotors for these fitments. Not designed for ABS models.

Product Description:

• The steel used in the new EBC rotor blases is a special stainless blend with higher friction effect than normal heat-treated stainless steel found on stock discs.
• Boasts up to 10% improvement in friction effect compared to standard stainless rotors, thus improving brakes even further.
• Weight is reduced 10% by using a 6 button drive system on a lightweight alloy center hub. The drive forces under braking are transmitted over a line contact on the square side of the button comparted to the point contact of a circular button.
• Used a special square button that is superior to round buttons. The rotor is allowed to expand inwards and outwards inrestrained under any speed and load condition. This feature extends the life of the rotor 5-10 times that of stock rotors.
• The floating design keeps the rotor blades perfectly tru and flat throughout their life cycle.

NOTE1: I have a VERY limited supply of these rotors, which are manufactured in Europe.

NOTE2: These rotors do not have holes for attaching ABS rings on ST4S/3S ABS models, but the carriers can be drilled out to accomodate the rings.