|
2V and 4V Valve Cover Gaskets - $3.00 each |
|
|
Above - On the left a 2-valve gasket for fit all post 1990 Ducatis except for DS1000/DS1100 motor. On the right an exhaust valve cover gasket (top) and an intake valve cover gasket (bottom) for all early 4V Ducatis including the 851/888/916/ and pre-2001 748 |
|
|
Visa / Mastercard/ Paypal / American Express Mail Orders |
|
| Valve
Cover Gaskets - $3.00 each
It is a good idea to replace your valve cover gaskets during a valve adjustment to prevent leaks. These gaskets are crushable fiber-based gaskets that do the trick. Note1: 2V gaskets have the same shape for both the intake and exhaust. Note2: Testastretta (749/999/848/1098/1198), DS1000/DS1100 and ST3 motors do NOT use/need replacement valve cover gaskets. Note3: Some 748, 996 and S4 models take different exhaust gaskets. Look at picture below. Locate the left side of the vertical cylinder head. On the top between the cam covers is a rocker pin cover. This 5 bolt rocker pin style (1 bolt hidden beneath oil feel line) means the head is a ST4-style head. It was fitted to the 996, S4R, and to some 748 models.
|
|